Index |
Identifier |
Field Type |
Field Length |
Description |
Units |
0 |
"first_zero_doppler_time" |
MJD |
1 |
First Zero Doppler Azimuth time of MDS which this data set describesTime of first range line in the MDS
described by this data set |
MJD |
1 |
"attach_flag" |
UChar |
1 |
Attachment Flag (always set to zero for this ADSR) |
flag |
2 |
"last_zero_doppler_time" |
MJD |
1 |
Last Zero Doppler Azimuth time of MDS which this data set describesTime of last range line in the MDS described
by this data set |
MJD |
3 |
"work_order_id" |
String |
1 |
Work Order ID (left-justified) |
ascii |
4 |
"time_diff" |
Float |
1 |
Time difference between sensing time of first input line and zero Doppler time of first output image line
(tdelta). (TBC)May be used during child product extraction from a stripline product (TBC). Left blank (set to
zero) for non-stripline products |
s |
5 |
"swath_id" |
String |
1 |
Swath number IS1, IS2, IS3, IS4, IS5, IS6, or IS7 for IM, WV and AP modes.Set to WSØ for WS and GM
modes |
ascii |
6 |
"range_spacing" |
Float |
1 |
Range sample spacing |
m |
7 |
"azimuth_spacing" |
Float |
1 |
Azimuth sample spacing at image center |
m |
8 |
"line_time_interval" |
Float |
1 |
Azimuth sample spacing in time (Line Time Interval) |
s |
9 |
"num_output_lines" |
ULong |
1 |
Number of output range lines in the image described by this ADS |
lines |
10 |
"num_samples_per_line" |
ULong |
1 |
Number of samples per output range line (includes zero filled samples) |
samples |
11 |
"data_type" |
String |
1 |
Output data typeSWORD, UWORD, or UBYTE |
ascii |
12 |
"spare_1" |
Spare |
1 |
Spare |
- |
13 |
"data_analysis_flag" |
UChar |
1 |
Raw Data Analysis used for Raw Data Correction 0 = correction done using default parameters1 = correction done
using raw data analysis results |
flag |
14 |
"ant_elev_corr_flag" |
UChar |
1 |
Antenna Elevation Pattern Correction Applied 0 = no correction applied1 = correction applied |
flag |
15 |
"chirp_extract_flag" |
UChar |
1 |
reconstructed Chirp used 0 = nominal chirp replica used1 = reconstructed chirp used |
flag |
16 |
"srgr_flag" |
UChar |
1 |
Slant Range to Ground Range Conversion Applied0 = no conversion applied1 = conversion applied |
flag |
17 |
"dop_cen_flag" |
UChar |
1 |
Doppler Centroid Estimation Performed0 = no estimation done1 = estimation done |
flag |
18 |
"dop_amb_flag" |
UChar |
1 |
Doppler Ambiguity Estimation Performed0 = no estimate done1 = estimate done |
flag |
19 |
"range_spread_comp_flag" |
UChar |
1 |
Range-spreading loss compensation Applied0 = no compensation applied1 = compensation applied |
flag |
20 |
"detected_flag" |
UChar |
1 |
Detection Applied0 = output product is complex1 = output product was detected |
flag |
21 |
"look_sum_flag" |
UChar |
1 |
Look Summation Performed0 = product is single look1 = product is multi-looked |
flag |
22 |
"rms_equal_flag" |
UChar |
1 |
RMS Equalization performed 0= rms equalization not performed during FBAQ decoding, 1 = rms equalization
performed during FBAQ decoding |
flag |
23 |
"ant_scal_flag" |
UChar |
1 |
Antenna Elevationscaling Factor applied 0= no scaling factor applied, 1 = scaling factor applied |
flag |
24 |
"spare_2" |
Spare |
1 |
Spare |
- |
25 |
"raw_data_analysis.1.num_gaps" |
ULong |
1 |
Number of input data gaps (a gap is defined as a predetermined number of range lines) (record 1) |
gaps |
26 |
"raw_data_analysis.1.num_missing_lines" |
ULong |
1 |
Number of missing lines, excluding data gaps (record 1) |
lines |
27 |
"raw_data_analysis.1.range_samp_skip" |
ULong |
1 |
Range sample skipping factor for raw data analysis (record 1) |
samples |
28 |
"raw_data_analysis.1.range_lines_skip" |
ULong |
1 |
Range lines skipping factor for raw data analysis (record 1) |
lines |
29 |
"raw_data_analysis.1.calc_i_bias" |
Float |
1 |
Calculated I channel bias (record 1) |
- |
30 |
"raw_data_analysis.1.calc_q_bias" |
Float |
1 |
Calculated Q channel bias (record 1) |
- |
31 |
"raw_data_analysis.1.calc_i_std_dev" |
Float |
1 |
Calculated I channel standard deviation (record 1) |
- |
32 |
"raw_data_analysis.1.calc_q_std_dev" |
Float |
1 |
Calculated Q channel standard deviation (record 1) |
- |
33 |
"raw_data_analysis.1.calc_gain" |
Float |
1 |
Calculated I/Q gain imbalance (record 1) |
- |
34 |
"raw_data_analysis.1.calc_quad" |
Float |
1 |
Calculated I/Q quadrature departure (record 1) |
- |
35 |
"raw_data_analysis.1.i_bias_max" |
Float |
1 |
I bias upper bound (record 1) |
- |
36 |
"raw_data_analysis.1.i_bias_min" |
Float |
1 |
I bias lower bound (record 1) |
- |
37 |
"raw_data_analysis.1.q_bias_max" |
Float |
1 |
Q bias upper bound (record 1) |
- |
38 |
"raw_data_analysis.1.q_bias_min" |
Float |
1 |
Q bias lower bound (record 1) |
- |
39 |
"raw_data_analysis.1.gain_min" |
Float |
1 |
I/Q gain lower bound (record 1) |
- |
40 |
"raw_data_analysis.1.gain_max" |
Float |
1 |
I/Q gain upper bound (record 1) |
- |
41 |
"raw_data_analysis.1.quad_min" |
Float |
1 |
I/Q quadrature departure lower bound (record 1) |
- |
42 |
"raw_data_analysis.1.quad_max" |
Float |
1 |
I/Q quadrature departure upper bound (record 1) |
- |
43 |
"raw_data_analysis.1.i_bias_flag" |
UChar |
1 |
I bias significance0 = I bias falls within acceptable range1 = I bias falls outside acceptable range (record
1) |
flag |
44 |
"raw_data_analysis.1.q_bias_flag" |
UChar |
1 |
Q bias Significance0 = Q bias falls within acceptable range1 = Q bias falls outside acceptable range (record
1) |
flag |
45 |
"raw_data_analysis.1.gain_flag" |
UChar |
1 |
I/Q Gain Significance0 = Gain falls within acceptable range1 = Gain falls outside acceptable range (record
1) |
flag |
46 |
"raw_data_analysis.1.quad_flag" |
UChar |
1 |
I/Q Quadrature Departure Significance0 = Quadrature departure falls within acceptable range1 =Quadrature
departure falls outside acceptable range (record 1) |
flag |
47 |
"raw_data_analysis.1.used_i_bias" |
Float |
1 |
I channel bias used for correction (may be different from measured value) (record 1) |
- |
48 |
"raw_data_analysis.1.used_q_bias" |
Float |
1 |
Q channel bias used for correction(may be different from measured value) (record 1) |
- |
49 |
"raw_data_analysis.1.used_gain" |
Float |
1 |
I/Q gain imbalance used for correction(may be different from measured value) (record 1) |
- |
50 |
"raw_data_analysis.1.used_quad" |
Float |
1 |
I/Q quadrature departure used for correction(may be different from measured value) (record 1) |
- |
51 |
"raw_data_analysis.2.num_gaps" |
ULong |
1 |
Number of input data gaps (a gap is defined as a predetermined number of range lines) (record 2) |
gaps |
52 |
"raw_data_analysis.2.num_missing_lines" |
ULong |
1 |
Number of missing lines, excluding data gaps (record 2) |
lines |
53 |
"raw_data_analysis.2.range_samp_skip" |
ULong |
1 |
Range sample skipping factor for raw data analysis (record 2) |
samples |
54 |
"raw_data_analysis.2.range_lines_skip" |
ULong |
1 |
Range lines skipping factor for raw data analysis (record 2) |
lines |
55 |
"raw_data_analysis.2.calc_i_bias" |
Float |
1 |
Calculated I channel bias (record 2) |
- |
56 |
"raw_data_analysis.2.calc_q_bias" |
Float |
1 |
Calculated Q channel bias (record 2) |
- |
57 |
"raw_data_analysis.2.calc_i_std_dev" |
Float |
1 |
Calculated I channel standard deviation (record 2) |
- |
58 |
"raw_data_analysis.2.calc_q_std_dev" |
Float |
1 |
Calculated Q channel standard deviation (record 2) |
- |
59 |
"raw_data_analysis.2.calc_gain" |
Float |
1 |
Calculated I/Q gain imbalance (record 2) |
- |
60 |
"raw_data_analysis.2.calc_quad" |
Float |
1 |
Calculated I/Q quadrature departure (record 2) |
- |
61 |
"raw_data_analysis.2.i_bias_max" |
Float |
1 |
I bias upper bound (record 2) |
- |
62 |
"raw_data_analysis.2.i_bias_min" |
Float |
1 |
I bias lower bound (record 2) |
- |
63 |
"raw_data_analysis.2.q_bias_max" |
Float |
1 |
Q bias upper bound (record 2) |
- |
64 |
"raw_data_analysis.2.q_bias_min" |
Float |
1 |
Q bias lower bound (record 2) |
- |
65 |
"raw_data_analysis.2.gain_min" |
Float |
1 |
I/Q gain lower bound (record 2) |
- |
66 |
"raw_data_analysis.2.gain_max" |
Float |
1 |
I/Q gain upper bound (record 2) |
- |
67 |
"raw_data_analysis.2.quad_min" |
Float |
1 |
I/Q quadrature departure lower bound (record 2) |
- |
68 |
"raw_data_analysis.2.quad_max" |
Float |
1 |
I/Q quadrature departure upper bound (record 2) |
- |
69 |
"raw_data_analysis.2.i_bias_flag" |
UChar |
1 |
I bias significance0 = I bias falls within acceptable range1 = I bias falls outside acceptable range (record
2) |
flag |
70 |
"raw_data_analysis.2.q_bias_flag" |
UChar |
1 |
Q bias Significance0 = Q bias falls within acceptable range1 = Q bias falls outside acceptable range (record
2) |
flag |
71 |
"raw_data_analysis.2.gain_flag" |
UChar |
1 |
I/Q Gain Significance0 = Gain falls within acceptable range1 = Gain falls outside acceptable range (record
2) |
flag |
72 |
"raw_data_analysis.2.quad_flag" |
UChar |
1 |
I/Q Quadrature Departure Significance0 = Quadrature departure falls within acceptable range1 =Quadrature
departure falls outside acceptable range (record 2) |
flag |
73 |
"raw_data_analysis.2.used_i_bias" |
Float |
1 |
I channel bias used for correction (may be different from measured value) (record 2) |
- |
74 |
"raw_data_analysis.2.used_q_bias" |
Float |
1 |
Q channel bias used for correction(may be different from measured value) (record 2) |
- |
75 |
"raw_data_analysis.2.used_gain" |
Float |
1 |
I/Q gain imbalance used for correction(may be different from measured value) (record 2) |
- |
76 |
"raw_data_analysis.2.used_quad" |
Float |
1 |
I/Q quadrature departure used for correction(may be different from measured value) (record 2) |
- |
77 |
"spare_3" |
Spare |
1 |
Spare |
- |
78 |
"start_time.1.first_obt" |
ULong |
2 |
On-board binary time of first input line processedLSB accurate to 15.26 ms. (Contained in two long integers)
(record 1) |
- |
79 |
"start_time.1.first_mjd" |
MJD |
1 |
Sensing time (MJD format) of first input line processedconverted from satellite binary time (record 1) |
MJD |
80 |
"start_time.2.first_obt" |
ULong |
2 |
On-board binary time of first input line processedLSB accurate to 15.26 ms. (Contained in two long integers)
(record 2) |
- |
81 |
"start_time.2.first_mjd" |
MJD |
1 |
Sensing time (MJD format) of first input line processedconverted from satellite binary time (record 2) |
MJD |
82 |
"parameter_codes.swst_code" |
UShort |
5 |
Sampling Window Start time code of first processed line |
code |
83 |
"parameter_codes.last_swst_code" |
UShort |
5 |
Sampling Window Start time code of last processed line |
code |
84 |
"parameter_codes.pri_code" |
UShort |
5 |
Pulse Repetition Interval code |
code |
85 |
"parameter_codes.tx_pulse_len_code" |
UShort |
5 |
Tx pulse length |
code |
86 |
"parameter_codes.tx_bw_code" |
UShort |
5 |
Tx pulse bandwidth |
code |
87 |
"parameter_codes.echo_win_len_code" |
UShort |
5 |
Echo Window Length |
code |
88 |
"parameter_codes.up_code" |
UShort |
5 |
Upconverter Level - Upconverter gain set on the instrument |
code |
89 |
"parameter_codes.down_code" |
UShort |
5 |
Downconverter Level - Downconverter gain set on the instrument |
code |
90 |
"parameter_codes.resamp_code" |
UShort |
5 |
Resampling factor for echo data |
code |
91 |
"parameter_codes.beam_adj_code" |
UShort |
5 |
Beam adjustment delta |
code |
92 |
"parameter_codes.beam_set_num_code" |
UShort |
5 |
Antenna Beam Set Number |
code |
93 |
"parameter_codes.tx_monitor_code" |
UShort |
5 |
Auxiliary Tx Monitor Level |
code |
94 |
"spare_4" |
Spare |
1 |
Spare |
- |
95 |
"error_counters.num_err_swst" |
ULong |
1 |
Number of errors detected in Sampling Window start time field. |
- |
96 |
"error_counters.num_err_pri" |
ULong |
1 |
Number of errors detected in PRI code field |
- |
97 |
"error_counters.num_err_tx_pulse_len" |
ULong |
1 |
Number of errors detected in Tx pulse length field |
- |
98 |
"error_counters.num_err_tx_pulse_bw" |
ULong |
1 |
Number of errors detected in Tx pulse bandwidth field. |
- |
99 |
"error_counters.num_err_echo_win_len" |
ULong |
1 |
Number of errors detected in Echo Window Length field. |
- |
100 |
"error_counters.num_err_up" |
ULong |
1 |
Number of errors detected in Upconverter Level field. |
- |
101 |
"error_counters.num_err_down" |
ULong |
1 |
Number of errors detected in Downconverter Level field. |
- |
102 |
"error_counters.num_err_resamp" |
ULong |
1 |
Number of errors detected in Resampling factor for echo data field. |
- |
103 |
"error_counters.num_err_beam_adj" |
ULong |
1 |
Number of errors detected in Beam adjustment delta field. |
- |
104 |
"error_counters.num_err_beam_set_num" |
ULong |
1 |
Number of errors detected in Antenna Beam Set Number field. |
- |
105 |
"spare_5" |
Spare |
1 |
Spare |
- |
106 |
"image_parameters.swst_value" |
Float |
5 |
Sampling Window Start time of first processed line |
s |
107 |
"image_parameters.last_swst_value" |
Float |
5 |
Sampling Window Start time of last processed line |
s |
108 |
"image_parameters.swst_changes" |
ULong |
5 |
Number of Sample Window Start Time changes within a beam |
- |
109 |
"image_parameters.prf_value" |
Float |
5 |
Pulse Repetition Frequency |
Hz |
110 |
"image_parameters.tx_pulse_len_value" |
Float |
5 |
Tx pulse length |
s |
111 |
"image_parameters.tx_pulse_bw_value" |
Float |
5 |
Tx pulse bandwidth |
Hz |
112 |
"image_parameters.echo_win_len_value" |
Float |
5 |
Echo Window Length |
s |
113 |
"image_parameters.up_value" |
Float |
5 |
Upconverter Level - Upconverter gain set on the instrument |
dB |
114 |
"image_parameters.down_value" |
Float |
5 |
Downconverter Level - Downconverter gain set on the instrument |
dB |
115 |
"image_parameters.resamp_value" |
Float |
5 |
Resampling factor |
- |
116 |
"image_parameters.beam_adj_value" |
Float |
5 |
Beam adjustment delta |
deg. |
117 |
"image_parameters.beam_set_value" |
UShort |
5 |
Antenna Beam Set Number |
- |
118 |
"image_parameters.tx_monitor_value" |
Float |
5 |
Auxiliary Tx Monitor Level |
- |
119 |
"spare_6" |
Spare |
1 |
Spare |
- |
120 |
"first_proc_range_samp" |
ULong |
1 |
First processed input range sample, first sample is 1 |
samples |
121 |
"range_ref" |
Float |
1 |
Range spreading loss reference range |
m |
122 |
"range_samp_rate" |
Float |
1 |
Range sampling rate |
Hz |
123 |
"radar_freq" |
Float |
1 |
Radar Frequency |
Hz |
124 |
"num_looks_range" |
UShort |
1 |
Number of range looks |
looks |
125 |
"filter_range" |
String |
1 |
Matched filter window type:HAMMING or KAISERØ or NONEØØØ |
ascii |
126 |
"filter_coef_range" |
Float |
1 |
Window coefficient for range-matched filter |
- |
127 |
"bandwidth.look_bw_range" |
Float |
5 |
Range Look Bandwidth (null to null) |
Hz |
128 |
"bandwidth.tot_bw_range" |
Float |
5 |
Total processed range bandwidth (null to null) |
Hz |
129 |
"nominal_chirp.1.nom_chirp_amp" |
Float |
4 |
4 nominal chirp amplitude coefficients (record 1) |
-, s-1, s-2, s-3 |
130 |
"nominal_chirp.1.nom_chirp_phs" |
Float |
4 |
4 nominal chirp phase coefficients (record 1) |
cycles,Hz,Hz/s,Hz/s2 |
131 |
"nominal_chirp.2.nom_chirp_amp" |
Float |
4 |
4 nominal chirp amplitude coefficients (record 2) |
-, s-1, s-2, s-3 |
132 |
"nominal_chirp.2.nom_chirp_phs" |
Float |
4 |
4 nominal chirp phase coefficients (record 2) |
cycles,Hz,Hz/s,Hz/s2 |
133 |
"nominal_chirp.3.nom_chirp_amp" |
Float |
4 |
4 nominal chirp amplitude coefficients (record 3) |
-, s-1, s-2, s-3 |
134 |
"nominal_chirp.3.nom_chirp_phs" |
Float |
4 |
4 nominal chirp phase coefficients (record 3) |
cycles,Hz,Hz/s,Hz/s2 |
135 |
"nominal_chirp.4.nom_chirp_amp" |
Float |
4 |
4 nominal chirp amplitude coefficients (record 4) |
-, s-1, s-2, s-3 |
136 |
"nominal_chirp.4.nom_chirp_phs" |
Float |
4 |
4 nominal chirp phase coefficients (record 4) |
cycles,Hz,Hz/s,Hz/s2 |
137 |
"nominal_chirp.5.nom_chirp_amp" |
Float |
4 |
4 nominal chirp amplitude coefficients (record 5) |
-, s-1, s-2, s-3 |
138 |
"nominal_chirp.5.nom_chirp_phs" |
Float |
4 |
4 nominal chirp phase coefficients (record 5) |
cycles,Hz,Hz/s,Hz/s2 |
139 |
"spare_7" |
Spare |
1 |
Spare |
- |
140 |
"num_lines_proc" |
ULong |
1 |
Number of input lines processed |
lines |
141 |
"num_look_az" |
UShort |
1 |
Number of Azimuth Looks |
looks |
142 |
"look_bw_az" |
Float |
1 |
Azimuth Look Bandwidth (null to null) -- this is the nominal value only for GM, WS, and AP. |
Hz |
143 |
"to_bw_az" |
Float |
1 |
Processed Azimuth bandwidth (null to null) -- this field is used only for IM products and WV imagettes. Filled
with zeros otherwise. |
Hz |
144 |
"filter_az" |
String |
1 |
Matched filter window type:HAMMING or KAISERØ or NONEØØØ |
ascii |
145 |
"filter_coef_az" |
Float |
1 |
Window coefficient for azimuth-matched filter |
- |
146 |
"az_fm_rate" |
Float |
3 |
3 co-efficients for Azimuth FM rate:Azimuth FM rate = C0 + C1(tSR-t0) + C2(tSR - t0)2tSR = 2 way slant range
time |
Hz/sHz/s2Hz/s3 |
147 |
"ax_fm_origin" |
Float |
1 |
2 way slant range time origin (t0) for Azimuth FM rate calculation |
ns |
148 |
"dop_amb_conf" |
Float |
1 |
Doppler Centroid Ambiguity Confidence MeasureValue between 0 and 1, 0 = poorest confidence, 1= highest
confidence |
- |
149 |
"spare_8" |
Spare |
1 |
Spare |
- |
150 |
"calibration_factors.1.proc_scaling_fact" |
Float |
1 |
Processor scaling factor (record 1) |
- |
151 |
"calibration_factors.1.ext_cal_fact" |
Float |
1 |
External Calibration Scaling Factor (mode/swath/polarization dependent) (record 1) |
- |
152 |
"calibration_factors.2.proc_scaling_fact" |
Float |
1 |
Processor scaling factor (record 2) |
- |
153 |
"calibration_factors.2.ext_cal_fact" |
Float |
1 |
External Calibration Scaling Factor (mode/swath/polarization dependent) (record 2) |
- |
154 |
"noise_estimation.noise_power_corr" |
Float |
5 |
Noise power correction factors |
- |
155 |
"noise_estimation.num_noise_lines" |
ULong |
5 |
Number of noise lines used to calculate factors |
- |
156 |
"spare_9" |
Spare |
1 |
Spare |
- |
157 |
"spare_10" |
Spare |
1 |
Spare |
- |
158 |
"output_statistics.1.out_mean" |
Float |
1 |
Output data mean Magnitude for detected products, real sample mean for SLC products (record 1) |
- |
159 |
"output_statistics.1.out_imag_mean" |
Float |
1 |
Output imaginary data mean Used for SLC products only (set to zero otherwise) (record 1) |
- |
160 |
"output_statistics.1.out_std_dev" |
Float |
1 |
Output data standard deviation Magnitude std. dev. for detected products, real sample std. dev. for SLC products
(record 1) |
- |
161 |
"output_statistics.1.out_imag_std_dev" |
Float |
1 |
Output imaginary data standard deviation Used for SLC products only (set to zero otherwise) (record 1) |
- |
162 |
"output_statistics.2.out_mean" |
Float |
1 |
Output data mean Magnitude for detected products, real sample mean for SLC products (record 2) |
- |
163 |
"output_statistics.2.out_imag_mean" |
Float |
1 |
Output imaginary data mean Used for SLC products only (set to zero otherwise) (record 2) |
- |
164 |
"output_statistics.2.out_std_dev" |
Float |
1 |
Output data standard deviation Magnitude std. dev. for detected products, real sample std. dev. for SLC products
(record 2) |
- |
165 |
"output_statistics.2.out_imag_std_dev" |
Float |
1 |
Output imaginary data standard deviation Used for SLC products only (set to zero otherwise) (record 2) |
- |
166 |
"spare_11" |
Spare |
1 |
Spare |
- |
167 |
"echo_comp" |
String |
1 |
Compression Method used for echo samples FBAQ, S&MØ, NONE |
ascii |
168 |
"echo_comp_ratio" |
String |
1 |
Compression Ratio for echo samples8/4, 8/3, 8/2, or 8/8 |
ascii |
169 |
"init_cal_comp" |
String |
1 |
Compression Method used for initial calibration samples FBAQ, S&MØ, NONE |
ascii |
170 |
"init_cal_ratio" |
String |
1 |
Compression Ratio for initial calibration samples8/4, 8/3, 8/2, or 8/8 |
ascii |
171 |
"per_cal_comp" |
String |
1 |
Compression Method used for periodic calibration samples FBAQ, S&MØ, NONE |
ascii |
172 |
"per_cal_ratio" |
String |
1 |
Compression Ratio for periodic calibration samples8/4, 8/3, 8/2, or 8/8 |
ascii |
173 |
"noise_comp" |
String |
1 |
Compression Method used for noise samples FBAQ, S&MØ, NONE |
ascii |
174 |
"noise_comp_ratio" |
String |
1 |
Compression Ratio for noise samples8/4, 8/3, 8/2, or 8/8 |
ascii |
175 |
"spare_12" |
Spare |
1 |
Spare |
- |
176 |
"beam_overlap" |
ULong |
4 |
Number of slant range samples in beam overlap(1-2, 2-3, 3-4, 4-5) |
- |
177 |
"lines_per_burst" |
ULong |
5 |
Number of lines per burst for this image 5 values for beams SS1 to SS5 in WS and GM modes.One value for AP mode,
all others set to zero. |
lines |
178 |
"spare_13" |
Spare |
1 |
Spare |
- |
179 |
"orbit_state_vectors.1.state_vect_time_1" |
MJD |
1 |
Time of state vector (record 1) |
MJD |
180 |
"orbit_state_vectors.1.x_pos_1" |
SLong |
1 |
X position in Earth fixed reference frame (record 1) |
10 -2m |
181 |
"orbit_state_vectors.1.y_pos_1" |
SLong |
1 |
Y position in Earth fixed reference frame (record 1) |
10 -2m |
182 |
"orbit_state_vectors.1.z_pos_1" |
SLong |
1 |
Z position in Earth fixed reference frame (record 1) |
10 -2m |
183 |
"orbit_state_vectors.1.x_vel_1" |
SLong |
1 |
X velocity relative to Earth fixed reference frame (record 1) |
10 -5m/s |
184 |
"orbit_state_vectors.1.y_vel_1" |
SLong |
1 |
Y velocity relative to Earth fixed reference frame (record 1) |
10 -5m/s |
185 |
"orbit_state_vectors.1.z_vel_1" |
SLong |
1 |
Z velocity relative to Earth fixed reference frame (record 1) |
10 -5m/s |
186 |
"orbit_state_vectors.2.state_vect_time_1" |
MJD |
1 |
Time of state vector (record 2) |
MJD |
187 |
"orbit_state_vectors.2.x_pos_1" |
SLong |
1 |
X position in Earth fixed reference frame (record 2) |
10 -2m |
188 |
"orbit_state_vectors.2.y_pos_1" |
SLong |
1 |
Y position in Earth fixed reference frame (record 2) |
10 -2m |
189 |
"orbit_state_vectors.2.z_pos_1" |
SLong |
1 |
Z position in Earth fixed reference frame (record 2) |
10 -2m |
190 |
"orbit_state_vectors.2.x_vel_1" |
SLong |
1 |
X velocity relative to Earth fixed reference frame (record 2) |
10 -5m/s |
191 |
"orbit_state_vectors.2.y_vel_1" |
SLong |
1 |
Y velocity relative to Earth fixed reference frame (record 2) |
10 -5m/s |
192 |
"orbit_state_vectors.2.z_vel_1" |
SLong |
1 |
Z velocity relative to Earth fixed reference frame (record 2) |
10 -5m/s |
193 |
"orbit_state_vectors.3.state_vect_time_1" |
MJD |
1 |
Time of state vector (record 3) |
MJD |
194 |
"orbit_state_vectors.3.x_pos_1" |
SLong |
1 |
X position in Earth fixed reference frame (record 3) |
10 -2m |
195 |
"orbit_state_vectors.3.y_pos_1" |
SLong |
1 |
Y position in Earth fixed reference frame (record 3) |
10 -2m |
196 |
"orbit_state_vectors.3.z_pos_1" |
SLong |
1 |
Z position in Earth fixed reference frame (record 3) |
10 -2m |
197 |
"orbit_state_vectors.3.x_vel_1" |
SLong |
1 |
X velocity relative to Earth fixed reference frame (record 3) |
10 -5m/s |
198 |
"orbit_state_vectors.3.y_vel_1" |
SLong |
1 |
Y velocity relative to Earth fixed reference frame (record 3) |
10 -5m/s |
199 |
"orbit_state_vectors.3.z_vel_1" |
SLong |
1 |
Z velocity relative to Earth fixed reference frame (record 3) |
10 -5m/s |
200 |
"orbit_state_vectors.4.state_vect_time_1" |
MJD |
1 |
Time of state vector (record 4) |
MJD |
201 |
"orbit_state_vectors.4.x_pos_1" |
SLong |
1 |
X position in Earth fixed reference frame (record 4) |
10 -2m |
202 |
"orbit_state_vectors.4.y_pos_1" |
SLong |
1 |
Y position in Earth fixed reference frame (record 4) |
10 -2m |
203 |
"orbit_state_vectors.4.z_pos_1" |
SLong |
1 |
Z position in Earth fixed reference frame (record 4) |
10 -2m |
204 |
"orbit_state_vectors.4.x_vel_1" |
SLong |
1 |
X velocity relative to Earth fixed reference frame (record 4) |
10 -5m/s |
205 |
"orbit_state_vectors.4.y_vel_1" |
SLong |
1 |
Y velocity relative to Earth fixed reference frame (record 4) |
10 -5m/s |
206 |
"orbit_state_vectors.4.z_vel_1" |
SLong |
1 |
Z velocity relative to Earth fixed reference frame (record 4) |
10 -5m/s |
207 |
"orbit_state_vectors.5.state_vect_time_1" |
MJD |
1 |
Time of state vector (record 5) |
MJD |
208 |
"orbit_state_vectors.5.x_pos_1" |
SLong |
1 |
X position in Earth fixed reference frame (record 5) |
10 -2m |
209 |
"orbit_state_vectors.5.y_pos_1" |
SLong |
1 |
Y position in Earth fixed reference frame (record 5) |
10 -2m |
210 |
"orbit_state_vectors.5.z_pos_1" |
SLong |
1 |
Z position in Earth fixed reference frame (record 5) |
10 -2m |
211 |
"orbit_state_vectors.5.x_vel_1" |
SLong |
1 |
X velocity relative to Earth fixed reference frame (record 5) |
10 -5m/s |
212 |
"orbit_state_vectors.5.y_vel_1" |
SLong |
1 |
Y velocity relative to Earth fixed reference frame (record 5) |
10 -5m/s |
213 |
"orbit_state_vectors.5.z_vel_1" |
SLong |
1 |
Z velocity relative to Earth fixed reference frame (record 5) |
10 -5m/s |
214 |
"spare_14" |
Spare |
1 |
Spare |
- |
215 |
"slant_range_time" |
Float |
1 |
2-way slant range time origin (t0) |
ns |
216 |
"dop_coef" |
Float |
5 |
Doppler centroid coefficients as a function of slant range time: D0, D1, D2, D3, and D4.where Doppler Centroid =
D0 + D1(tSR-t0) + D2(tSR-t0)2 + D3(tSR-t0)3 + D4(tSR-t0)4 |
HzHz/sHz/s2Hz/s3Hz/s4 |
217 |
"dop_conf" |
Float |
1 |
Doppler Centroid Confidence MeasureValue between 0 and 1, 0 = poorest confidence, 1= highest confidence |
- |
218 |
"spare_15" |
Spare |
1 |
Spare |
- |
219 |
"chirp_width" |
Float |
1 |
3-dB pulse width of chirp replica cross-correlation function between extract chirp and nominal chirp |
samples |
220 |
"chirp_sidelobe" |
Float |
1 |
First side lobe level of chirp replica cross-correlation function between reconstructed chirp and nominal
chirp |
dB |
221 |
"chirp_islr" |
Float |
1 |
ISLR of chirp replica cross-correlation function between reconstructed chirp and nominal chirp |
dB |
222 |
"chirp_peak_loc" |
Float |
1 |
Peak location of cross-correlation function between reconstructed chirp and nominal chirp |
samples |
223 |
"chirp_power" |
Float |
1 |
Chirp power |
- |
224 |
"elev_corr_factor" |
Float |
1 |
Elevation gain correction scaling factor applied to range compressed samples |
- |
225 |
"spare_16" |
Spare |
1 |
Spare |
- |
226 |
"cal_info.1.max_cal" |
Float |
3 |
Max of Cal pulses 1, 2, and 3 amplitude (record 1) |
- |
227 |
"cal_info.1.avg_cal" |
Float |
3 |
Average of Cal pulse 1, 2, and 3 amplitude over the 3 dB on either side of the max amplitude (record 1) |
- |
228 |
"cal_info.1.avg_val_1a" |
Float |
1 |
Average of Cal pulse 1A over the sample window (record 1) |
- |
229 |
"cal_info.1.phs_cal" |
Float |
4 |
Extracted phase for calibration pulse 1, 1A, 2, and 3 (record 1) |
degrees |
230 |
"cal_info.2.max_cal" |
Float |
3 |
Max of Cal pulses 1, 2, and 3 amplitude (record 2) |
- |
231 |
"cal_info.2.avg_cal" |
Float |
3 |
Average of Cal pulse 1, 2, and 3 amplitude over the 3 dB on either side of the max amplitude (record 2) |
- |
232 |
"cal_info.2.avg_val_1a" |
Float |
1 |
Average of Cal pulse 1A over the sample window (record 2) |
- |
233 |
"cal_info.2.phs_cal" |
Float |
4 |
Extracted phase for calibration pulse 1, 1A, 2, and 3 (record 2) |
degrees |
234 |
"cal_info.3.max_cal" |
Float |
3 |
Max of Cal pulses 1, 2, and 3 amplitude (record 3) |
- |
235 |
"cal_info.3.avg_cal" |
Float |
3 |
Average of Cal pulse 1, 2, and 3 amplitude over the 3 dB on either side of the max amplitude (record 3) |
- |
236 |
"cal_info.3.avg_val_1a" |
Float |
1 |
Average of Cal pulse 1A over the sample window (record 3) |
- |
237 |
"cal_info.3.phs_cal" |
Float |
4 |
Extracted phase for calibration pulse 1, 1A, 2, and 3 (record 3) |
degrees |
238 |
"cal_info.4.max_cal" |
Float |
3 |
Max of Cal pulses 1, 2, and 3 amplitude (record 4) |
- |
239 |
"cal_info.4.avg_cal" |
Float |
3 |
Average of Cal pulse 1, 2, and 3 amplitude over the 3 dB on either side of the max amplitude (record 4) |
- |
240 |
"cal_info.4.avg_val_1a" |
Float |
1 |
Average of Cal pulse 1A over the sample window (record 4) |
- |
241 |
"cal_info.4.phs_cal" |
Float |
4 |
Extracted phase for calibration pulse 1, 1A, 2, and 3 (record 4) |
degrees |
242 |
"cal_info.5.max_cal" |
Float |
3 |
Max of Cal pulses 1, 2, and 3 amplitude (record 5) |
- |
243 |
"cal_info.5.avg_cal" |
Float |
3 |
Average of Cal pulse 1, 2, and 3 amplitude over the 3 dB on either side of the max amplitude (record 5) |
- |
244 |
"cal_info.5.avg_val_1a" |
Float |
1 |
Average of Cal pulse 1A over the sample window (record 5) |
- |
245 |
"cal_info.5.phs_cal" |
Float |
4 |
Extracted phase for calibration pulse 1, 1A, 2, and 3 (record 5) |
degrees |
246 |
"cal_info.6.max_cal" |
Float |
3 |
Max of Cal pulses 1, 2, and 3 amplitude (record 6) |
- |
247 |
"cal_info.6.avg_cal" |
Float |
3 |
Average of Cal pulse 1, 2, and 3 amplitude over the 3 dB on either side of the max amplitude (record 6) |
- |
248 |
"cal_info.6.avg_val_1a" |
Float |
1 |
Average of Cal pulse 1A over the sample window (record 6) |
- |
249 |
"cal_info.6.phs_cal" |
Float |
4 |
Extracted phase for calibration pulse 1, 1A, 2, and 3 (record 6) |
degrees |
250 |
"cal_info.7.max_cal" |
Float |
3 |
Max of Cal pulses 1, 2, and 3 amplitude (record 7) |
- |
251 |
"cal_info.7.avg_cal" |
Float |
3 |
Average of Cal pulse 1, 2, and 3 amplitude over the 3 dB on either side of the max amplitude (record 7) |
- |
252 |
"cal_info.7.avg_val_1a" |
Float |
1 |
Average of Cal pulse 1A over the sample window (record 7) |
- |
253 |
"cal_info.7.phs_cal" |
Float |
4 |
Extracted phase for calibration pulse 1, 1A, 2, and 3 (record 7) |
degrees |
254 |
"cal_info.8.max_cal" |
Float |
3 |
Max of Cal pulses 1, 2, and 3 amplitude (record 8) |
- |
255 |
"cal_info.8.avg_cal" |
Float |
3 |
Average of Cal pulse 1, 2, and 3 amplitude over the 3 dB on either side of the max amplitude (record 8) |
- |
256 |
"cal_info.8.avg_val_1a" |
Float |
1 |
Average of Cal pulse 1A over the sample window (record 8) |
- |
257 |
"cal_info.8.phs_cal" |
Float |
4 |
Extracted phase for calibration pulse 1, 1A, 2, and 3 (record 8) |
degrees |
258 |
"cal_info.9.max_cal" |
Float |
3 |
Max of Cal pulses 1, 2, and 3 amplitude (record 9) |
- |
259 |
"cal_info.9.avg_cal" |
Float |
3 |
Average of Cal pulse 1, 2, and 3 amplitude over the 3 dB on either side of the max amplitude (record 9) |
- |
260 |
"cal_info.9.avg_val_1a" |
Float |
1 |
Average of Cal pulse 1A over the sample window (record 9) |
- |
261 |
"cal_info.9.phs_cal" |
Float |
4 |
Extracted phase for calibration pulse 1, 1A, 2, and 3 (record 9) |
degrees |
262 |
"cal_info.10.max_cal" |
Float |
3 |
Max of Cal pulses 1, 2, and 3 amplitude (record 10) |
- |
263 |
"cal_info.10.avg_cal" |
Float |
3 |
Average of Cal pulse 1, 2, and 3 amplitude over the 3 dB on either side of the max amplitude (record 10) |
- |
264 |
"cal_info.10.avg_val_1a" |
Float |
1 |
Average of Cal pulse 1A over the sample window (record 10) |
- |
265 |
"cal_info.10.phs_cal" |
Float |
4 |
Extracted phase for calibration pulse 1, 1A, 2, and 3 (record 10) |
degrees |
266 |
"cal_info.11.max_cal" |
Float |
3 |
Max of Cal pulses 1, 2, and 3 amplitude (record 11) |
- |
267 |
"cal_info.11.avg_cal" |
Float |
3 |
Average of Cal pulse 1, 2, and 3 amplitude over the 3 dB on either side of the max amplitude (record 11) |
- |
268 |
"cal_info.11.avg_val_1a" |
Float |
1 |
Average of Cal pulse 1A over the sample window (record 11) |
- |
269 |
"cal_info.11.phs_cal" |
Float |
4 |
Extracted phase for calibration pulse 1, 1A, 2, and 3 (record 11) |
degrees |
270 |
"cal_info.12.max_cal" |
Float |
3 |
Max of Cal pulses 1, 2, and 3 amplitude (record 12) |
- |
271 |
"cal_info.12.avg_cal" |
Float |
3 |
Average of Cal pulse 1, 2, and 3 amplitude over the 3 dB on either side of the max amplitude (record 12) |
- |
272 |
"cal_info.12.avg_val_1a" |
Float |
1 |
Average of Cal pulse 1A over the sample window (record 12) |
- |
273 |
"cal_info.12.phs_cal" |
Float |
4 |
Extracted phase for calibration pulse 1, 1A, 2, and 3 (record 12) |
degrees |
274 |
"cal_info.13.max_cal" |
Float |
3 |
Max of Cal pulses 1, 2, and 3 amplitude (record 13) |
- |
275 |
"cal_info.13.avg_cal" |
Float |
3 |
Average of Cal pulse 1, 2, and 3 amplitude over the 3 dB on either side of the max amplitude (record 13) |
- |
276 |
"cal_info.13.avg_val_1a" |
Float |
1 |
Average of Cal pulse 1A over the sample window (record 13) |
- |
277 |
"cal_info.13.phs_cal" |
Float |
4 |
Extracted phase for calibration pulse 1, 1A, 2, and 3 (record 13) |
degrees |
278 |
"cal_info.14.max_cal" |
Float |
3 |
Max of Cal pulses 1, 2, and 3 amplitude (record 14) |
- |
279 |
"cal_info.14.avg_cal" |
Float |
3 |
Average of Cal pulse 1, 2, and 3 amplitude over the 3 dB on either side of the max amplitude (record 14) |
- |
280 |
"cal_info.14.avg_val_1a" |
Float |
1 |
Average of Cal pulse 1A over the sample window (record 14) |
- |
281 |
"cal_info.14.phs_cal" |
Float |
4 |
Extracted phase for calibration pulse 1, 1A, 2, and 3 (record 14) |
degrees |
282 |
"cal_info.15.max_cal" |
Float |
3 |
Max of Cal pulses 1, 2, and 3 amplitude (record 15) |
- |
283 |
"cal_info.15.avg_cal" |
Float |
3 |
Average of Cal pulse 1, 2, and 3 amplitude over the 3 dB on either side of the max amplitude (record 15) |
- |
284 |
"cal_info.15.avg_val_1a" |
Float |
1 |
Average of Cal pulse 1A over the sample window (record 15) |
- |
285 |
"cal_info.15.phs_cal" |
Float |
4 |
Extracted phase for calibration pulse 1, 1A, 2, and 3 (record 15) |
degrees |
286 |
"cal_info.16.max_cal" |
Float |
3 |
Max of Cal pulses 1, 2, and 3 amplitude (record 16) |
- |
287 |
"cal_info.16.avg_cal" |
Float |
3 |
Average of Cal pulse 1, 2, and 3 amplitude over the 3 dB on either side of the max amplitude (record 16) |
- |
288 |
"cal_info.16.avg_val_1a" |
Float |
1 |
Average of Cal pulse 1A over the sample window (record 16) |
- |
289 |
"cal_info.16.phs_cal" |
Float |
4 |
Extracted phase for calibration pulse 1, 1A, 2, and 3 (record 16) |
degrees |
290 |
"cal_info.17.max_cal" |
Float |
3 |
Max of Cal pulses 1, 2, and 3 amplitude (record 17) |
- |
291 |
"cal_info.17.avg_cal" |
Float |
3 |
Average of Cal pulse 1, 2, and 3 amplitude over the 3 dB on either side of the max amplitude (record 17) |
- |
292 |
"cal_info.17.avg_val_1a" |
Float |
1 |
Average of Cal pulse 1A over the sample window (record 17) |
- |
293 |
"cal_info.17.phs_cal" |
Float |
4 |
Extracted phase for calibration pulse 1, 1A, 2, and 3 (record 17) |
degrees |
294 |
"cal_info.18.max_cal" |
Float |
3 |
Max of Cal pulses 1, 2, and 3 amplitude (record 18) |
- |
295 |
"cal_info.18.avg_cal" |
Float |
3 |
Average of Cal pulse 1, 2, and 3 amplitude over the 3 dB on either side of the max amplitude (record 18) |
- |
296 |
"cal_info.18.avg_val_1a" |
Float |
1 |
Average of Cal pulse 1A over the sample window (record 18) |
- |
297 |
"cal_info.18.phs_cal" |
Float |
4 |
Extracted phase for calibration pulse 1, 1A, 2, and 3 (record 18) |
degrees |
298 |
"cal_info.19.max_cal" |
Float |
3 |
Max of Cal pulses 1, 2, and 3 amplitude (record 19) |
- |
299 |
"cal_info.19.avg_cal" |
Float |
3 |
Average of Cal pulse 1, 2, and 3 amplitude over the 3 dB on either side of the max amplitude (record 19) |
- |
300 |
"cal_info.19.avg_val_1a" |
Float |
1 |
Average of Cal pulse 1A over the sample window (record 19) |
- |
301 |
"cal_info.19.phs_cal" |
Float |
4 |
Extracted phase for calibration pulse 1, 1A, 2, and 3 (record 19) |
degrees |
302 |
"cal_info.20.max_cal" |
Float |
3 |
Max of Cal pulses 1, 2, and 3 amplitude (record 20) |
- |
303 |
"cal_info.20.avg_cal" |
Float |
3 |
Average of Cal pulse 1, 2, and 3 amplitude over the 3 dB on either side of the max amplitude (record 20) |
- |
304 |
"cal_info.20.avg_val_1a" |
Float |
1 |
Average of Cal pulse 1A over the sample window (record 20) |
- |
305 |
"cal_info.20.phs_cal" |
Float |
4 |
Extracted phase for calibration pulse 1, 1A, 2, and 3 (record 20) |
degrees |
306 |
"cal_info.21.max_cal" |
Float |
3 |
Max of Cal pulses 1, 2, and 3 amplitude (record 21) |
- |
307 |
"cal_info.21.avg_cal" |
Float |
3 |
Average of Cal pulse 1, 2, and 3 amplitude over the 3 dB on either side of the max amplitude (record 21) |
- |
308 |
"cal_info.21.avg_val_1a" |
Float |
1 |
Average of Cal pulse 1A over the sample window (record 21) |
- |
309 |
"cal_info.21.phs_cal" |
Float |
4 |
Extracted phase for calibration pulse 1, 1A, 2, and 3 (record 21) |
degrees |
310 |
"cal_info.22.max_cal" |
Float |
3 |
Max of Cal pulses 1, 2, and 3 amplitude (record 22) |
- |
311 |
"cal_info.22.avg_cal" |
Float |
3 |
Average of Cal pulse 1, 2, and 3 amplitude over the 3 dB on either side of the max amplitude (record 22) |
- |
312 |
"cal_info.22.avg_val_1a" |
Float |
1 |
Average of Cal pulse 1A over the sample window (record 22) |
- |
313 |
"cal_info.22.phs_cal" |
Float |
4 |
Extracted phase for calibration pulse 1, 1A, 2, and 3 (record 22) |
degrees |
314 |
"cal_info.23.max_cal" |
Float |
3 |
Max of Cal pulses 1, 2, and 3 amplitude (record 23) |
- |
315 |
"cal_info.23.avg_cal" |
Float |
3 |
Average of Cal pulse 1, 2, and 3 amplitude over the 3 dB on either side of the max amplitude (record 23) |
- |
316 |
"cal_info.23.avg_val_1a" |
Float |
1 |
Average of Cal pulse 1A over the sample window (record 23) |
- |
317 |
"cal_info.23.phs_cal" |
Float |
4 |
Extracted phase for calibration pulse 1, 1A, 2, and 3 (record 23) |
degrees |
318 |
"cal_info.24.max_cal" |
Float |
3 |
Max of Cal pulses 1, 2, and 3 amplitude (record 24) |
- |
319 |
"cal_info.24.avg_cal" |
Float |
3 |
Average of Cal pulse 1, 2, and 3 amplitude over the 3 dB on either side of the max amplitude (record 24) |
- |
320 |
"cal_info.24.avg_val_1a" |
Float |
1 |
Average of Cal pulse 1A over the sample window (record 24) |
- |
321 |
"cal_info.24.phs_cal" |
Float |
4 |
Extracted phase for calibration pulse 1, 1A, 2, and 3 (record 24) |
degrees |
322 |
"cal_info.25.max_cal" |
Float |
3 |
Max of Cal pulses 1, 2, and 3 amplitude (record 25) |
- |
323 |
"cal_info.25.avg_cal" |
Float |
3 |
Average of Cal pulse 1, 2, and 3 amplitude over the 3 dB on either side of the max amplitude (record 25) |
- |
324 |
"cal_info.25.avg_val_1a" |
Float |
1 |
Average of Cal pulse 1A over the sample window (record 25) |
- |
325 |
"cal_info.25.phs_cal" |
Float |
4 |
Extracted phase for calibration pulse 1, 1A, 2, and 3 (record 25) |
degrees |
326 |
"cal_info.26.max_cal" |
Float |
3 |
Max of Cal pulses 1, 2, and 3 amplitude (record 26) |
- |
327 |
"cal_info.26.avg_cal" |
Float |
3 |
Average of Cal pulse 1, 2, and 3 amplitude over the 3 dB on either side of the max amplitude (record 26) |
- |
328 |
"cal_info.26.avg_val_1a" |
Float |
1 |
Average of Cal pulse 1A over the sample window (record 26) |
- |
329 |
"cal_info.26.phs_cal" |
Float |
4 |
Extracted phase for calibration pulse 1, 1A, 2, and 3 (record 26) |
degrees |
330 |
"cal_info.27.max_cal" |
Float |
3 |
Max of Cal pulses 1, 2, and 3 amplitude (record 27) |
- |
331 |
"cal_info.27.avg_cal" |
Float |
3 |
Average of Cal pulse 1, 2, and 3 amplitude over the 3 dB on either side of the max amplitude (record 27) |
- |
332 |
"cal_info.27.avg_val_1a" |
Float |
1 |
Average of Cal pulse 1A over the sample window (record 27) |
- |
333 |
"cal_info.27.phs_cal" |
Float |
4 |
Extracted phase for calibration pulse 1, 1A, 2, and 3 (record 27) |
degrees |
334 |
"cal_info.28.max_cal" |
Float |
3 |
Max of Cal pulses 1, 2, and 3 amplitude (record 28) |
- |
335 |
"cal_info.28.avg_cal" |
Float |
3 |
Average of Cal pulse 1, 2, and 3 amplitude over the 3 dB on either side of the max amplitude (record 28) |
- |
336 |
"cal_info.28.avg_val_1a" |
Float |
1 |
Average of Cal pulse 1A over the sample window (record 28) |
- |
337 |
"cal_info.28.phs_cal" |
Float |
4 |
Extracted phase for calibration pulse 1, 1A, 2, and 3 (record 28) |
degrees |
338 |
"cal_info.29.max_cal" |
Float |
3 |
Max of Cal pulses 1, 2, and 3 amplitude (record 29) |
- |
339 |
"cal_info.29.avg_cal" |
Float |
3 |
Average of Cal pulse 1, 2, and 3 amplitude over the 3 dB on either side of the max amplitude (record 29) |
- |
340 |
"cal_info.29.avg_val_1a" |
Float |
1 |
Average of Cal pulse 1A over the sample window (record 29) |
- |
341 |
"cal_info.29.phs_cal" |
Float |
4 |
Extracted phase for calibration pulse 1, 1A, 2, and 3 (record 29) |
degrees |
342 |
"cal_info.30.max_cal" |
Float |
3 |
Max of Cal pulses 1, 2, and 3 amplitude (record 30) |
- |
343 |
"cal_info.30.avg_cal" |
Float |
3 |
Average of Cal pulse 1, 2, and 3 amplitude over the 3 dB on either side of the max amplitude (record 30) |
- |
344 |
"cal_info.30.avg_val_1a" |
Float |
1 |
Average of Cal pulse 1A over the sample window (record 30) |
- |
345 |
"cal_info.30.phs_cal" |
Float |
4 |
Extracted phase for calibration pulse 1, 1A, 2, and 3 (record 30) |
degrees |
346 |
"cal_info.31.max_cal" |
Float |
3 |
Max of Cal pulses 1, 2, and 3 amplitude (record 31) |
- |
347 |
"cal_info.31.avg_cal" |
Float |
3 |
Average of Cal pulse 1, 2, and 3 amplitude over the 3 dB on either side of the max amplitude (record 31) |
- |
348 |
"cal_info.31.avg_val_1a" |
Float |
1 |
Average of Cal pulse 1A over the sample window (record 31) |
- |
349 |
"cal_info.31.phs_cal" |
Float |
4 |
Extracted phase for calibration pulse 1, 1A, 2, and 3 (record 31) |
degrees |
350 |
"cal_info.32.max_cal" |
Float |
3 |
Max of Cal pulses 1, 2, and 3 amplitude (record 32) |
- |
351 |
"cal_info.32.avg_cal" |
Float |
3 |
Average of Cal pulse 1, 2, and 3 amplitude over the 3 dB on either side of the max amplitude (record 32) |
- |
352 |
"cal_info.32.avg_val_1a" |
Float |
1 |
Average of Cal pulse 1A over the sample window (record 32) |
- |
353 |
"cal_info.32.phs_cal" |
Float |
4 |
Extracted phase for calibration pulse 1, 1A, 2, and 3 (record 32) |
degrees |
354 |
"spare_17" |
Spare |
1 |
Spare |
- |
355 |
"first_line_time" |
MJD |
1 |
Zero Doppler Time at first line of imagette |
MJD |
356 |
"first_line_tie_points.range_samp_nums_first" |
ULong |
3 |
Range sample number Gives the range location of the grid points. First range sample is 1, is M (includes zero
filled samples) |
- |
357 |
"first_line_tie_points.slant_range_times_first" |
Float |
3 |
2 way slant range time to range sample |
ns |
358 |
"first_line_tie_points.inc_angles_first" |
Float |
3 |
Incidence Angle at range sample |
deg. |
359 |
"first_line_tie_points.lats_first" |
SLong |
3 |
geodetic latitude of range sample (positive north) |
(1e-6) degrees |
360 |
"first_line_tie_points.longs_first" |
SLong |
3 |
geodetic longitude of range sample (positive east) |
(1e-6) degrees |
361 |
"mid_line_time" |
MJD |
1 |
Zero Doppler Time at centre line of imagette |
MJD |
362 |
"mid_range_line_nums" |
ULong |
1 |
Range line number of the center range line |
- |
363 |
"mid_line_tie_points.range_samp_nums_mid" |
ULong |
3 |
Range sample number Gives the range location of the grid points. First range sample is 1, is M (includes zero
filled samples) |
- |
364 |
"mid_line_tie_points.slant_range_times_mid" |
Float |
3 |
2 way slant range time to range sample |
ns |
365 |
"mid_line_tie_points.inc_angles_mid" |
Float |
3 |
Incidence Angle at range sample |
deg. |
366 |
"mid_line_tie_points.lats_mid" |
SLong |
3 |
geodetic latitude of range sample (positive north) |
(1e-6) degrees |
367 |
"mid_line_tie_points.longs_mid" |
SLong |
3 |
geodetic longitude of range sample (positive east) |
(1e-6) degrees |
368 |
"last_line_time" |
MJD |
1 |
Zero Doppler Time at last line of imagette |
MJD |
369 |
"last_line_num" |
ULong |
1 |
Range line number of the last range line |
- |
370 |
"last_line_tie_points.range_samp_nums_last" |
ULong |
3 |
Range sample number Gives the range location of the grid points. First range sample is 1, is M (includes zero
filled samples) |
- |
371 |
"last_line_tie_points.slant_range_times_last" |
Float |
3 |
2 way slant range time to range sample |
ns |
372 |
"last_line_tie_points.inc_angles_last" |
Float |
3 |
Incidence Angle at range sample |
deg. |
373 |
"last_line_tie_points.lats_last" |
SLong |
3 |
geodetic latitude of range sample (positive north) |
(1e-6) degrees |
374 |
"last_line_tie_points.longs_last" |
SLong |
3 |
geodetic longitude of range sample (positive east) |
(1e-6) degrees |
375 |
"swst_offset" |
Float |
1 |
Wave cell SWST offset from center of the sub-swath to start of imagette. 208 ns increments |
ns |
376 |
"ground_range_bias" |
Float |
1 |
Wave cell Ground range bias from centre of the Sub-Swath to the centre of the imagette (Ground range, km) |
km |
377 |
"elev_angle_bias" |
Float |
1 |
Wave cell Elevation angle biasfrom centre of the Sub-Swath elevation to the centre of the imagette (deg) |
deg |
378 |
"imagette_range_len" |
Float |
1 |
Imagette length in range (m) |
m |
379 |
"imagette_az_len" |
Float |
1 |
Imagette length in azimuth (m) |
m |
380 |
"imagette_range_res" |
Float |
1 |
Nominal Imagette resolution in slant range (m) |
m |
381 |
"ground_res" |
Float |
1 |
Nominal resolution in ground range |
m |
382 |
"imagette_az_res" |
Float |
1 |
Nominal Imagette resolution in azimuth (m) |
m |
383 |
"platform_alt" |
Float |
1 |
Altitude (platform to ellipsoid) in metres (centre of wave cell) |
m |
384 |
"platform_vel" |
Float |
1 |
Platform Velocity (m/s)w.r.t moving earth |
m/s |
385 |
"slant_range" |
Float |
1 |
Range to centre of imagette (m)from platform to target |
m |
386 |
"cw_drift" |
Float |
1 |
CW signal drift |
- |
387 |
"wave_subcycle" |
UShort |
1 |
Wave sub-cycle (1 or 2) of this wave cell |
- |
388 |
"earth_radius" |
Float |
1 |
Earth Radius at imagette center sample |
m |
389 |
"sat_height" |
Float |
1 |
Satellite distance to earth center |
m |
390 |
"first_sample_slant_range" |
Float |
1 |
Distance from satellite to first range pixel in the full SLC image |
m |
391 |
"spare_18" |
Spare |
1 |
Spare |
- |
392 |
"elevation_pattern.slant_range_time" |
Float |
11 |
2 way slant range times |
ns |
393 |
"elevation_pattern.elevation_angles" |
Float |
11 |
Corresponding elevation angles |
degrees |
394 |
"elevation_pattern.antenna_pattern" |
Float |
11 |
Corresponding two-way antenna elevation pattern values |
dB |
395 |
"spare_19" |
Spare |
1 |
Spare |
- |